Cotton Pad Organizer

I designed the Model to be printed with a 0.3mm Layer Height using a 1.0mm Nozzle set to 133% Outer Wall Line Width resulting in only two Perimeters:

Additionally, the outer two curves have painted on Fuzzy Skin with a 0.3mm Fuzzy Skin Point Distance and a 0.4mm Fuzzy Skin Thickness:

The back of the Model has a Flat Spot intended for use with a Double Sided Tape in case you want to stick it to something like a Mirror ( if so make sure NOT to place Fuzzy Skin on that Flat Spot! )

Obviously, ANY of these Settings are merely Suggestions… If you only have a smaller Nozzle it will merely print more Perimeters and without Fuzzy Skin, you'll get a smooth Surface.

The 90x70mm Size can perhaps be scaled to fit other Pad Sizes but that has not been tested 😉