March 1, 2022
Description
Made these last minute for a work college how mentioned he was going to a fancy dress party as Frankenstein. I joked about him having neck bolts but said he didn’t have any. So I quickly drew these up and printed them out.
The magnets clamp the 'bolts' in place through clothing, in this case he was going to be wearing a polar neck jumper.
Check out the pictures and you’ll see that they are held in place with magnets.
The magnets used are O/D 12.5mm x 3mm thick. The hole dia is I/D 5.4mm but this is not required for this project.
Bit late for this year (2019 lol) but ready for neck's years......(neck...get it lol)
Printer Brand:
Ultimaker
Printer:
S5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: Ultimaker PLA n/a
Notes:
These were printed at 10% infill due to limited time.
Support was not needed, due to limited time.
The 'threads' didn't print to bad considering and accuracy was not a concern.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
JamesR5D4
