Ender3 Pro LED Light Bracket

I wanted to add an LED lightbar to my Ender3 Pro, but did not want to sacrifice my tool holder and/or filament guide, and there wasn't anything readily available for minimal surface mounting.

I needed to cut the wire just after the switch -- which was necessary to add it to a toggle switch and a 5V regulator -- in order to fish it through the eyelet in the side of the bracket.

I used wire clips to retain the wire around the back and between the extruded aluminum support and the power supply.

PRINTING:

Print in the orientation of the photos (opening down) and use tree supports.

Supports are required to avoid dovetail/enclosure sagging, but full supports are impossible to remove (for me, but YMMV) from inside of the enclosures. Tree supports gave me full form support, while also being removable without destroying the parts.