Diamond Baseball 8 gallon bucket handle

This model is a simple 5 or 8 gallon bucket handle. I made it to fit a Diamond brand baseball bucket. The original plastic handle decomposed in sunlight and fell apart. Probably would want to print this in a plastic that is not light sensitive, though i did PLA anyway because i wanted to test it out. 

Its about 25mm wide to spread the load in your hand, by about 90mm long. The center hole is 4.5mm to accommodate a 3.5mm wire in a tight fit clip on fashion. 

I included the freecad .fcstd model in case you want to modify it, as well as the 3mf file to enable rapid printing.