Alternative Clicky-Clacky door handle (Suitable for thick panels)

Alternative handle suitable for thicker panels. Handle is mounted on the printer frame instead of the door, allowing to be mounted regardless of the thickness of your panels. Motion is limited to 20 degrees and handle in closed state is held in place by the magnets and an extra teeth grabbing the inside of the door extrusion. Design is symmetrical and can be applied on the left or right side of the printer. Print as orientated and can be done without supports.

BOM:

• 2x M3x8 SHCS
• 2x M3x12 SHCS/BHCS
• 4x M3x25 SHCS/BHCS
• 2x M5x45 dowel pin
• 2x M5x0.5 washer/shim (optional, around the dowels for smoother movement)
• 2x M5x7x8 split bushing
• 8x 6x3mm magnet

NOTE: Feel free to remix (please uphold the license) but there is no STEP file since i'm not working with software that uses solids. The STL's uploaded here is the best i can provide so there is no need to ask for a STEP.