Huawei Watch Wireless charger stand

I could not find a well working stand, that was simple enough, would fit the charger properly and would not damage the charger when removing, so I made my own.

It has very simple design, which requires a very little material, and has a practicle hook for the cable. The stand is printed laying down, and design with chamfer to print without overhangs.

It also one of very few that can fit the watch with loop strap.

I made it specificaly for Huawei Watch Fit 4, but should fit any Huawei or other brand wireless charger. If the fit is not perfect, scale it in slicer. Mine chager has diameter of 38,5mm.

I recommend to put double sided tape on bottom and put it to fixed place.

Print instructions

• Printed in PLA, but any material should do
• Supports are required
• 15% infill
• 3 perimeters, so the stand part prints quicker