Phone stand (for magnetic charging cable)

Designed to fit this magnetic charging cable as an alternative to wireless charging. https://www.amazon.com/gp/product/B07Z397262/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

V1 can be printed without supports, V2 will need supports (I used tree supports in Cura and it worked well). These both work with Otter Box cases and V2 may work with pop socket depending on phone and location pop socket. The magnet on the cable is fairly strong. I find the best way to get it off the stand without the piece getting pulled out of the phone is to tilt the phone forward as you remove it from the stand. Command strips would work great for securing it to your desk.

Cable gets inserted snugly along the bottom channel. If you have any questions or feedback don't hesitate to comment or message me. These are a work in progress and I'm new to 3D design and appreciate any input! I'm also open to any modifications you want to fit your needs.

Print Settings

Printer:

Artillery Sidewinder X1

Rafts:

Supports:

Yes

Resolution:

Infill:

20

Filament:

Inland PLA

Black

Category: Mobile Phone