January 8, 2026
Description
Be one of the first to get a custom case for the new iPhone 17 (Standard)!
This is a protective, minimalist case, optimized for 3D printing and precisely modeled based on the Accessory Design Guidelines (ADG) to ensure a perfect fit and full access to all new buttons and ports.
The case wall thickness is set at 1.4mm, providing an excellent balance of rigid protection and sleek design.
I have included two files to match different printing and protection needs:
Minimalist Version (No Supports): (Features the larger camera cutout, as seen in the first two images). Ideal for quick printing. It leaves the camera bump exposed (perfect if you use separate lens protectors) but maintains raised protective edges.
Camera Protection Version (Requires Supports): (Features the precise cutouts for the lenses, covering the rest of the camera block). Includes full coverage for the camera module, reducing dust accumulation and protecting the lenses from direct impact.
Critical Protection: The case includes a protective lip of approximately 0.8 mm - 1.0 mm around the screen edge, safeguarding the display when the phone is placed face down.
This model is designed for maximum durability using rigid, impact-resistant materials like PETG or ASA.
| Setting | Recommendation | Rationale |
|---|---|---|
| Material | PETG (Excellent) or ASA (Highest UV/Heat resistance) | Ensures necessary impact strength and longevity. |
| Wall Thickness | 1.4 mm | Provides rigid protection without being overly bulky. |
| Layer Height | 0.20 mm | Good balance between print speed and detailed finish (especially around ports). |
| Perimeters (Wall Loops) | 4 | Crucial: Using 4 loops with a 0.4mm nozzle achieves the 1.6mm or 1.2mm wall thickness. Use 3-4 loops to ensure the 1.4mm wall is solid. |
| Infill (Density) | 0% | The 1.4mm wall thickness is created by the perimeters; infill is not needed. |
Supports Needed: NO. Print flat on the build plate.
Supports Needed: YES. Supports are only required from the build plate, supporting the overhang inside the camera cutout.
Slicer Setting: Use "Supports on build plate only."
License:
Creative Commons — Attribution — Noncommercial — Share Alike
3DPrintDesigns.it
