core one advanced filtration free flow adapter

to better trap the heat when printing, or so the venting fans can do their work freely when needed, just slide the vent slider for needed option. can be operated to both left or right side depending  which slide you put up or down. part adds 4cm to the depth , easiest to fasten adapter first then the filter unit.

I have mine printer to stand in about 45degree to the wall and then the filter and the printer is about same distance from the wall

I printed mine in abs but considering its on the outside petg or better should be just fine

You need:

12x M3x10 

4x M3 square nut

4x m3 washer

holes for the slider is not threaded so use the screw to thread it