October 20, 2025
Description
Secure your new iPhone 17 Pro immediately with this custom, high-precision 3D printable case featuring a sleek, minimalist aesthetic!
This protective case is precisely modeled on the latest design specifications (Accessory Design Guidelines) to guarantee a perfect, snug fit around the large triple-camera module and all new ports of the iPhone 17 Pro.
The case wall thickness is set at 1.4mm, offering an ideal balance of strong impact protection and a minimal, pocket-friendly profile.
I have included two distinct files to let you choose your level of camera protection:
Minimalist (No Supports): Perfect for a clean print. It features a large, open cutout for the camera module, providing quick access and leaving the module visible while still offering raised protective edges (lips).
Camera Protection (Requires Supports): Includes comprehensive coverage for the entire camera module, with precise cutouts only for the three individual lenses, shielding them from dust and direct bumps.
Critical Protection: The case features a crucial protective lip (raised edge) of approximately 0.8 mm - 1.0 mm around the screen, ensuring the display is protected when placed face down.
This design is optimized for maximum durability using rigid, heat-resistant materials.
| Setting | Recommendation | Rationale |
|---|---|---|
| Material | ASA (Recommended for superior heat/UV resistance) or PETG | ASA is best for durability against sun/heat (e.g., in a car). PETG is an excellent strong alternative. |
| Wall Thickness | 1.4 mm | Provides rigid protection while keeping the case manageable. |
| Layer Height | 0.20 mm | Good balance between print speed and detail for ports and buttons. |
| Perimeters (Wall Loops) | 4 | Crucial: Ensures the 1.4 mm wall thickness is completely solid for maximum strength. |
| Infill (Density) | 0% | Structural integrity comes from the 4 perimeters; infill is unnecessary. |
Supports Needed: NO. Print flat on the build plate.
Supports Needed: YES. Supports are only needed from the build plate to support the overhangs inside the camera lens holes.
Slicer Setting: Use "Supports on build plate only."
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
3DPrintDesigns.it
