pilmat 45mm Prop Stick Frame

An open prop frame for a 45mm prop quad. Based on the Meteor 75 Pro. Should only need to swap over FC, motors and canopy. All up weight with stock canopy is ~28g (pictured is 27.8g).

This version seems to have less prop wash than the stock frame.

V1 is 80mm wheelbase. It is a parameter that can easily be changed. Seems to have good resistance in crashes, but feedback would be welcome to tweak design if necessary.

Hardware required:

• 4x 1.4x8mm screws (best if they are truss head) for FC
• 4x 1.2x4mm screws (best if they are truss head) for battery tray
• Stock motor screws (12x M1.4x3)

Printing:

• Print main chassis flat. 0.2mm layers. I have found 2 walls with zero infill to work well.
  • Tested in PLA+ and PETG.
• Print battery try standing up with a raft. 0.2mm layers.