Wineglass lamp (two materials)

Here you can see my creation of a lamp made of 2 different materials. A wine glass inspired me here. Once an opaque material (Prusament Galaxy Black) and once made of a transparent material (Prusament PVB smoky black). 
I think it has become a modern lamp. This fits any holder for an E27 LED lamp. I used the ones from Ikea here. The opening on the lampshade for attachment is 41.5mm and the opening for the lamp bulb on the bottom is 97.98mm.

Print preparation

Use the filament change function on the right where you can view the layers of your lamp. 
Then go to layer 259 and height 51,80mm and press the small + to add a filament change.
Now you can simply print the lamp as described below and the hints.

Print description

In principle, you do not need any support for printing. Simply place the top area 
as in the picture above on the hotplate.

Filament: opake PLA for the first bottom parts, transpartent PLA or PVB for the top part

Layer thickness / mode: 0,2mm 

Infill: no

I wish you a happy print and I am happy about your experiences! 
I'm curious which combination of materials you choose, take a picture and upload it!

Greetings LPS