Table Lamp

This lamp is inspired by Agustin Arroyo's Maker Lamp.

Motivation

I wanted to create a lamp that looks simple but has a little more detail than the lamp mentioned above. The fluted pattern runs from the base to the lampshade.

Additional materials required

• E27 light bulb
• E27 lamp socket with cable and maximum outer diameter of 43 mm (to fit through the hole)
• Double-sided adhesive tape (for easier assembly of the two parts)

Printing information

All parts were created with PrusaSlicer for my Ender 3. You can open the .3mf files to see more detailed information about my settings.

The components are available as .3mf, .step, and .stl files.

!!!Important information!!!

The lampshade is sliced in spiral vase mode. The hole at the bottom of the lampshade is 1 mm deep. This means that the bottom layers should be 1 mm thick in total. (open the .3mf files to see more detailed information)