NX4827T043 Case

Edit; Just added a screen holder that I use on my Tennis ball shooter.

I made this case for a Nextion NX4827T043 to control my tennis ball shooter. Two versions are included, one has a cutout to make insertion of the uSD card possible. I will print one without the cutout when my screen code is stable. You could always update the screen through the serial interface, probably wouldn't be too slow if you change to 115.2kb.

The back is 2mm and a piece of plywood or plastic would be fine.

I've included the Fusion360 share link so you can back up the time line and just use the immediate screen dimentions which took a little tweaking. Surely not a good demonstration of technique but I'm always in a hurry. https://a360.co/2Tz3YzV

I made it fairly large so it would be easy to hold from any direction to use the touch screen. I run about 4 feet of repurposed usb wire to my unit.

This is my 40th creation I've shared. I'm pleased if on 10 people find it usefull and amazed when I see over a 100 downloads.

I hope it's put to good use in creating your own project.

Cheers

KIsssys

Category: Electronics