BMW 68mm wheel cap with integrated removable supports

Pattern depth is 1mm, dual-colour print is possible with different base colour and contrasting top colour. Use auto-orient for printability. Do not print it out of PLA due to the heat after driving and the sun. ABS/ASA are good options, PETG parts will fall out if there's something wrong with brakes getting stuck for example (ask how I know).

NOTE: This is still work in progress. I uploaded the model without printing it first and it turned out the supports were too close to main piece, sticking together and supports were impossible to remove (printed with ASA-GF). Uploaded new model with bigger gaps between the model and supports, can be removed with something sharper and flat.