Haunyang VFD Cover Spindle Lights

I upgraded my Router to a Chinese spindle. The cover that is provided wasn't flat on the front to mount a Pot or switches so I made a replacement and also made LED light rings for a 60mm air cooled spindle and a 72mm ring for a water cooled spindle. I used stick on 12 volt led strips that are 12 volts for every 3 leds. Just start at the split and go around the outside folding over at each bend.

Caution: The VFD cover is there to protect you from fatal high voltages so if you aren't knowledgeable enough around High Voltage's don't mess with the cover or trying to add any switches or potentiometers.

Make it look professional by printing out the Caution label and sticking it on.

Cheers

Steve

Print Settings

Printer Brand:

LulzBot

Printer:

Rafts:

No

Supports:

Notes:

Nothing critical.

Post-Printing

If printing the VFD cover make sure to remove all support material. I may need a little triming

to fit.

How I Designed This

Fusion360

Category: Machine Tools