ARYZ Multiply | Pendant light E26/27

ARYZ Multiply | Pendant light E26/27

The ARYZ Multiply is the third born of the ARYZ collection and is, of course, based on the "multiply X " symbol.

Every evening, my children and I sit together over their arithmetic homework — adding, subtracting, multiplying, dividing. The symbols started to dance in my mind, and I couldn’t help turning them into a collection of 3D-printable pendant lights that I called ARYZ, short for arithmetics.

This lamp prints surprisingly fast for its size and diffuses light beautifully.

It is available in large (Ø254mm) and medium (Ø209mm) versions, to accommodate most common printers out there, and it's meant to be used with "E26/27 light bulb sockets".

You can get the light cords on Amazon here:

For Europe: E27 cord:  https://amzn.to/3OVrZjK

For the US: E26/E27 cord:  https://amzn.to/434c0qZ

DIMENSIONS (LARGE) | Ø 254 mm, H 250 mm
DIMENSIONS (MEDIUM) | Ø 209 mm, H 209 mm

3D PRINT SETTINGS: 
The shade prints upside-down. 
The STL file is already oriented properly.

It is meant to be printed in vase mode (spiralize or spiral vase).

For 0.8mm nozzle:

• use 0.4mm/layer
• line width of 1mm
• 6 bottom layers

For 0.4mm nozzle:

• use 0.2mm/layer
• line width of 1mm
• 12 bottom layers

Happy printing!