October 17, 2025
Description
Tired of your gaming or work headphones cluttering your desk? This Minimalist Screw Clamp Headphone Holder is the perfect solution to keep your workspace clean, organized, and your headphones always within easy reach.
The robust, minimalist design allows you to securely fasten the holder to any desk, shelf, or tabletop with a maximum thickness of 27mm.
Key Features:
Robust Clamp Mechanism: Securely attaches without the need for adhesives, drilling, or permanent screws.
Minimalist & Space-Saving: Ideal for small desks, gaming setups, or clean home-office environments.
Easy, Support-Free Printing: Designed to be printed without support structures for a clean finish and fast assembly.
Headband Protection: The top of the hook is wide and curved to distribute the headphone weight evenly across the headband, preventing deformation and wear.
Integrated Padding (Optional): (Referencing the black pads visible in your image) The design includes recesses for adding optional rubber or felt pads to protect the desk surface and prevent slippage(should ideally be printed in TPU to protect your desk surface and provide excellent anti-slip grip.)
This model typically consists of three parts (The Hook, The Clamp Base, and The Screw/Bolt) and requires specific orientation for maximum strength.
| Component | Print Orientation | Notes |
|---|---|---|
| Hook Body | Lay flat on its side | Ensures maximum strength along the curved hook section. |
| Screw/Bolt | Print upright (Vertically) | Crucial for clean thread printing and maximizing bolt strength. |
| Clamp Base | Lay flat on the build plate |
| Setting | Recommendation | Rationale |
|---|---|---|
| Material | PETG or High-Strength PLA | PETG is highly recommended for its superior mechanical properties and resilience against clamping stress. |
| Layer Height | 0.2 mm | Good balance between thread detail and speed. |
| Perimeters (Wall Loops) | 3 - 4 | Essential for the strength and stiffness of the clamp and hook structure. |
| Infill (Density) | 30% - 40% (Pattern: Cubic or Gyroid) | Important: Higher infill dramatically improves the clamping performance and prevents parts from cracking when the screw is tightened. |
| Supports | NO | Designed to be fully support-free. |
Recommended Material for Pads (Anti-Slip / Protection):
Material: TPU (Flexibility: 95A is ideal)
Layer Height: 0.2 mm
Infill: 100% (Solid infill for maximum cushioning/grip)
Supports: Not required for these small parts.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
3DPrintDesigns.it
