Rumble motor removal tool for Nintendo Switch Pro Controllers

Once you have the controller disasembled as far as the mainbord being visible, insert the square post of this tool into the square hole on the back of the handles, now push and the vibration motors should pop out.

WARNING: Please be careful to not tear the flexible PCB on the side of the motor. It's only stuck onto the motor housing with a little double sided tape and can tear easily.

Print Settings

• 0.2mm layer height (0.3mm first layer),
• PLA/PETG/ASA/ABS (pretty much any filament works),
• No supports,
• No raft.