Calendar stand - desktop calendars (T-calendar/Victoria/etc)

Default display size (the angled side where the calendar rests): 220x160 mm
Latch gap: 0.5mm, length: 50mm (This holds the calendar in place)

If 220mm is not your desired length: Scale it along the Z axis (Z axis only, if its oriented on its side) down or up as you like. This way it wont deform the model!

If you want the display side taller/shorter than 160mm: You can scale it along the appropriate axis, but this will change the angle the calendar will rest! Default angle is 60 degrees.

I strongly recommend printing it on its side with brims!