S200 Magazine Box 3x

Box for holding 3 Air Arms S200/CZ 200 Magazines.

Assembly: Put the lid on the box, and slide the pin in from the left side. I recommend you add a dab of glue to either side of the pin afterwards to keep it there.

Use supports for printing the pin and the box. Font is Rajdhani, as that is the one used on the Air Arms website.

In the images is an air arms magazine and two Altaros ones. They are higher quality than the Air Arms ones and cheaper, I recommend them.

Print the pin on its side.

Use supports for printing the pin and the main box.

Thingiverse prevents me uploading a zip file for some reason, the file S200 Mag Box all files.zip.stl is a zip folder with the extension changed so you can download this in one click.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

I used 0.2mm with adaptive layer height set to 0.08mm, but it's a low detail object so really any will do.

Infill:

Filament: eSun PLA+ Black

Notes:

Category: Sport & Outdoors