LED Halloween Ghost - easy to print, easy to build

This cute ghost has an opening for a standard LED light and an eyelet for hanging for an extra-spooky Halloween time!

How to Print

Download and open the 3MF file with everything set to go, or:

• For filament I strongly recommend Lithopane filament for translucency.
• Choose a low layer height (e.g., 0.15mm)
• Paint on support enforcers on the inside of the head.
• Make sure you randomize seams

How to Build

Lights

The light inside are HL lights with (colored version or   uncolored version) you can buy from any of the large retailers. Their specs are:

• 3cm diameter
• waterproof
• turn at the bottom to switch on/off
• remote for adjusting the color

You can also try other similar lights. You may have to adjust the scaling for different diameters. Happy to hear from your experience!

Build

Print, push in the light from the bottom. Don't push to hard! Make the top part flush with the bottom of the ghost.That's it.