Wineglass Transport Stand

This wineglass stand for wine bottles holds the glasses securely with its unique mounting system. You are needed to tilt the glass at an angle before inserting it making it, if using correct thickness, more securely at place during travel. There are two versions, one with 4 glasses and one with 2 glasses.

Printing instructions
For build plates that are small (225mm*225mm) you can print at an 45* angle making it printable on build plates down to 190x190mm. I used a 0.6mm nozzle and printed this with following setting which was more than sturdy enough:

• 2 walls
• 3 top layers
• 2 bottom layers
• 15% infill

Happy printing!