Low Poly Halloween Skull Wall Lamp

Low Poly Skull Wall Lamp

Directions: Print lying face up, remove supports if needed (organic are best), insert tea light upside and hang on flat surface of your choice using the notch at the back (I used a screw in the wall).

Printed using luminous filament, with a 0.8mm nozzle, 0.4mm layers and 10% infill to get more glow from the tea light shine through.

Used paint on supports at the apex of the cavity and on right cheek overhang (as per screen snip below).

LED tealight I used is a flickering Halloween version from a supermarket. Dimensions (in mm) 36d x 18h base with a 17h ‘flame’. If using larger would suggest check cavity dimensions though it is not designed with a tight fit for the led light.

Thanks to Peter Farrell for allowing his excellent low poly skull to be remixed.

Happy Halloween!