October 18, 2025
Description
Beware the living pumpkin! It walks on twisting green vines, snaring ill-fated trespassers! Its hideous face was carved by a mad farmer, whose evil soul animates its rotting orange flesh! It has space for a festive tea light!
Happy Halloween 2025!
The pumpkin can be printed in any material. Default 0.2mm settings are fine, but make sure supports are turned on to support the carved face.
I repeat: supports on! Or your face will turn to spaghetti!
For the vines, I recommend using PETG or ABS/ASA. PLA is susceptible to creep which will cause the joints to go floppy after a week or so.
I repeat: PETG or ABS! Or your limbs will go limp!
To match the model in the photographs, you will need:
soozafonestem.stlhub.stlvineSegment.stlvineSegmentWithBall.stlleaf.stlYou can print more or fewer segments if you want!
Assembly is quite straightforward. Simply snap balls into sockets!
The pumpkin attaches to the hub with a bayonet-style mount. Just line it up and lock it in place with a clockwise turn.
You can place an LED tea light in the hub for extra spooky ambiance! (DO NOT use a real candle!)
I've added a STEP file of the blank pumpkin if you would like to carve your own!
This model uses the same ball joint system that you will find in my other models, but at a larger scale.
If you would like to add parts from another 13 series model to this one, just scale them to 150% first. (E.g., a 100% scale Pumpkin is compatible with a 150% scale Dummy 13.)
Alternatively, if you aren't using the tea light, you can scale this model down to 66.67%.
This model uses a Creative Commons CC BY-NC-SA 4.0 license. That means that you are allowed to share and remix this design, as long as:
If you would like to sell prints of this design, you can join my Printables Club to get a seller license!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
