Anet Lack Extruder Mount (42x42x48 Motor)

Designed to fit an A6 bowden extruder with an upgraded motor (42x42x48mm). It includes a slot for securing a cable tie but I've found that the friction fit is sufficient.

Instructions:

1. Use a 16mm flat wood bit to drill a hole.
2. Drop in the insert.
3. Seat the mount over the insert.
4. Screw in place.
5. Slide the bowden tube through the insert.
6. Insert bowden tube into coupler.
7. Seat motor in holder.

Hardware:

• 1 x M3x16mm hex screw
• 2 x M3x20mm hex screws
• 3 x M3 washers
• 2 x M4x20mm wood screws

Print Settings

Supports:

No

Resolution:

Infill:

20%

Category: 3D Printing