August 25, 2022
Description
The Haladie / Boomerang from Netflix's Castlevania. Trevor Belmont uses this to stab and dispose of night creatures at melee range. This is my stationary version. Both the 2 and 4 bladed versions seen in the show can be assembled depending on the amount of pieces that are printed.
blade1-full x 4
blade2-full - optional (x4 for full boomerang version)
handle x 2
rail x 2 ( x4 for full boomerang version)
pin x 4 (alternatively you can buy 6mm x 50 mm wooden pegs off amazon instead of printing the pins)
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Filament: Hatchbox PLA Gold
Notes:
Using the provided pins (or purchased wooden alignment pegs 6mm x 50 mm off amazon) align the blades with the handle and glue together.
Wedge the rail against the flat surface near the hilt of the blade.
If making the full 4 bladed prop, do the same for two sides and glue the assembled blade2-full to the notches that are 90 degrees to the blade1-full arrangement. I do not recommend throwing this model through the air and cannot guarantee it's resiliency on landing.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
ICosplayInsanity
