WAGO clamp opener / pliers

About:

These pliers are designed specifically for opening WAGO 221 (and similar) clamps.
Opens clamps easily than by hand when a wire is already inserted.
The model is optimized for support-free printing, minimal material use, and a short print time.

Dimensions & Compatibility:

• Tested on Prusa MK4S printer
• Recommended materials: PLA or PETG
• Includes ready-to-print G-codes
• Two variants STL - with smaller and larger tolerances

Print settings:

• 2 perimetres for PLA
• 3 perimeters for PETG
• 15% infill is sufficient
• Print orientation as in the provided file
• Prints without supports, 0.15 mm layer height, 0.4 mm nozzle

If you have any ideas or feedback about the model, please let me know.