October 19, 2025
Description
hey folks,
Update: so the fan duct is ready, it fits on an 50mm radial fan designed for that https://de.aliexpress.com/store/product/5-pcs-lot-50mmx50mmx15mm-5cm-5015-50mm-Radial-Turbo-Blower-Fan-12V-For-Computer-CPU/513161_32554832116.html?detailNewVersion=&categoryId=708041
how i told you, here is the single hotend mount for my x carrier (http://www.thingiverse.com/thing:1862515) i inserted a little cable management to change parts easy i added a mount for an XT60 plug, solder it to your heater push it tru and turn it, ready ;) https://hobbyking.com/en_us/male-xt60-connectors-5pcs-bag-genuine.html https://hobbyking.com/en_us/female-xt60-connectors-5pcs-bag-genuine.html
i made it expandable, so the fist thing that it expands is the Bowden Multiplexer (hellyeah^^) it is designed for 1.75mm filament and 4mm x 2mm ptfe bowden tubing
other things like probe mount follow
the hotend mount screws are M4 (ISO 4762)
the multiplexer screws are M3 (also ISO 4762)
the Pushfits i used for the multiplexer are the original E3D http://e3d-online.com/Threaded-Bowden-Coupling-1.75mm-Filament?search=bowden or also https://youprintin3d.de/hotendszubehoer/e3d/zubehoerersatzteile/345/threaded-bowden-coupling-1.75mm-filament.html or even this ;) https://reprapworld.com/products/e3d/spares_and_extras/1_75mm/e3d_v6_threaded_bowden_coupling_1_75mm/
so the thing is still at work! be patient, tell me errors or anything else (nice comments are also accepted ;)
Printer:
custom I3
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
30% honeycomb
License:
Creative Commons — Attribution — Noncommercial
7
Manuel Vogt
