February 22, 2026
Description
Warning
The yellow parts are not included. You must purchase the 3D SETS models 7 and 8.
Definition
This kit provides several options, allowing for 28 different combinations (see pictures).
Front fender options:
Chrome sidestep (without 0 / with 1)
Turn signal (without 0 / with 1)
Bumper (without 0 / with 1)
Rear fender options:
Chrome sidestep (without 0 / with 1) must be identical to the front fender option
Bumper (without 0 / with 1)
Front bumper options:
EUR model
No licence plate
EUR licence plate
US licence plate
US model
No licence plate
EUR licence plate
US licence plate
Rear bumper options:
EUR model
US model
Sidestep option:
With chrome parts on the fenders (without 0 / with 1) must be identical to the front and rear fender options
Printing
A printer of the same size as the one defined by 3D SETS is required.
Use the same settings as 3D SETS for the same parts.
No MMU required, except for rear lights.
Build
Use the 3D SETS build guide.
Longer screws can be used to assemble the fenders, the Front Mask, and the Rear End.
Additional M2 screws can be used to screw the bumpers to the bodywork or the Front Bumper links.
Feedback
It is welcome.
Remark
None
Version
v1/v20251012
v2/20260222 : Axle Belt Pulley 15 Teeth-401140801 for a less tense belt
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
mbe075
