Collapsible Wand w Belt Clasp

Collapsible Wand for Halloween  

PLA / 0.3 mm layer ht / 2 perimeters / 15% Gyroid infill / Supports on Handle (see figure).

Assemble as shown in figure.  A short piece of 1.75 mm filament can be used to lock the end cap in place.

Note: Wand can be extended with a flick of the wrist.  Avoid using excessive force, however, since that may make re-collapsing difficult.  If that happens, tap small end of the extended wand on a table to loosen it.