Vertical WAGO 221 / 222 / 2273 Series Universal Connector Holders

Welcome, and thank you for choosing my model. 
I will provide some context for this model. 

Information

I have designed holders for the WAGO 2273, 222, and the famous 221 series, compatible with all available sizes of these connectors. For each series, there are variants that can hold 1, 2, or 3 WAGO connectors.

You can easily scroll down to find the desired size and connector type, and then select whether you want a holder for 1, 2, or 3 connectors.
At the bottom of this page, you’ll find the list and links to each WAGO connector holder for easy access.

The holders are optimized to use very little filament, making them fast and efficient to 3D print. The design is simple and can be easily printed on any Prusa printer without the need for supports or special settings.

Each holder features mounting holes with a diameter of 5 mm, allowing for easy installation on a mounting board, panel, or inside an electrical enclosure. You don’t need to use all the mounting holes — for example, on the 3-connector holder you can use just one or two holes and it will still be firmly secured.
If the holes are slightly too large for your screws, you can easily use a washer to ensure a perfect fit. You can see that the holder is slightly lower than the Wago terminal itself. This makes it easier to insert and remove the Wago terminal from the holder. When you insert the Wago terminal into the holder, it will still be secure and you will hear a click.

WAGO Links

Happy printing!

Keep it save!