March 10, 2023
Description
Ein Satz Warnhinweise, um Unbefugte auf die Risiken unsachgemäßer Bedienung hinzuweisen, und Leitlinien für das angepasste Verhalten zu geben. Traditionell benutzt für Rechenmaschinen, hat sich aber auch bei anderen elektrischen Gerätschaften bewährt.
Gestaltet und modernisiert in Anlehnung an ISO 7010 nach dem Stil des Vereinigten Königreichs.
https://de.wikipedia.org/wiki/Blinkenlights_(Jargon)
https://en.wikipedia.org/wiki/Blinkenlights
You'll only need to attend the printer for the first part of the first layer. White is the last colour to be changed to, and will print the remainder of the entire print time.
When you use the atteched 3mf settings, the first layer will be built up as follows:
Layer info, Layer number: 1
Layer height (mm): 0.2
GCODE commands: 94845
Filament (Tool 0): 149.30mm
Filament (Tool 1): 580.10mm
Filament (Tool 2): 441.83mm
Filament (Tool 3): 288.51mm
Filament (Tool 4): 620.84mm
Estimated print time: 01:09:21
are best chosen to ISO 3864 https://en.wikipedia.org/wiki/ISO_3864
yellow, red, blue, black and white are required; white not only serves a a base, but also to helps the colours on top shine better, as filaments are usually not densely pigmented.
I have mixed ASA, ABS and PETG, so I could chose the best matching colours.
The smaller, the better - details may get lost, especially in the symbols. Pictures show 0.25mm-prints.
initial release
increased 1st layer extrusion width from 0.35 to 0.38 to minimise small gaps in colouring; changed the design of the Schnappen symbol to be wide enough for one line
| rev00 | rev01 |
License:
Creative Commons — Attribution
7
Bodo
