March 5, 2022
Description
Some mounts for 1/2" EMT rods to hold your spools. I used an old wine fridge, bought cheap on Craigslist. Refrigerators are perfect for this because they seal well and are readily available used for not much money.
A rotary desiccant dehumidifier in the cabinet keeps humidity < 10%.
Print 2 of each for each rack. Screw the hanger into the wall of the fridge. Cut 1/2" EMT to length. Slip the caps over the EMT, then slide them over the hanger. They should friction fit in place. If not, a dab of glue will secure them.
I printed them in SnoLabs PC+. They have been in use for over a year without issue.
F360 file added if you wish to modify.
Category: 3D Printer AccessoriesLicense:
Creative Commons — Attribution
7
Ocho Camino
