This beautifully scrolled box hides a surprise. It's "Thing" from the Addams Family, the disembodied hand!
The lid opens only 40 degrees because that's how Thing prefers it. Inside, are areas for candies with a circular isolation area to prevent jamming underneath Thing.
This unit has been scaled for 180mm 3d printer beds but can easily be scaled up for a larger more intimidating Thing.
Bottom Slicer Settings
- Print orientation - Sitting on box bottom
- Layer height - 0.28
- Wall line count - 4
- Top layers - 4
- Bottom layers - 4
- Infill density - 10%
- Infill pattern - Cubic Subdivision
- Support - Required
- Support Structure - Normal
- Build plate adhesion - None
Lid Slicer Settings
- Print orientation - Sitting in lid top
- Layer height - 0.28
- Wall line count - 4
- Top layers - 4
- Bottom layers - 4
- Infill density - 20%
- Infill pattern - Cubic Subdivision
- Support - Required
- Support Structure - Tree. Tree supports provide least artifacting and easier removal.
- Build plate adhesion - None
Hinge Pin Slicer Settings
- Print orientation - Lengthwise for strength
- Layer height - 0.20
- Wall line count - 4
- Top layers - 4
- Bottom layers - 4
- Infill density - 20%
- Infill pattern -Cubic Subdivision
- Support - None
- Build plate adhesion - Brim
Jesster
