December 18, 2019
Description
Rugged Case for Pocket Book Touch Lux 3
REMARK 1:
CAT logo on Bottom part: first print one color CAT gcode, remove skirt, and dont let yout printer cool down, print over this part the BOT G code so will have 2 color final part wit logo
REMARK 2: COVER part there will be a color change, this is the time to insert D4,95 t=2,75mm (selled officiali as 3mm) neodiniummagnets into holes, after this printer will cover this magnets to not to fall out
PETG 0,2mm , 25% gyroid infill , 4 perimeters OR BETTTER USE GCODES
REMARK 1:
CAT logo on Bottom part: first print one color CAT gcode, remove skirt, and dont let yout printer cool down, print over this part the BOT G code so will have 2 color final part wit logo
REMARK 2: COVER part there will be a color change, this is the time to insert D4,95 t=2,75mm (selled officiali as 3mm) neodiniummagnets into holes, after this printer will cover this magnets to not to fall out
License:
Creative Commons — Public Domain
rev_one
