October 23, 2025
Description
TBS Unify Pro32 DP or HV VTX mount designed to fit in front of the Heewing T1 ranger. My goal was to have the antenna in line with the borders of the front air inlet.
You need to cut out the foam inside the air inlet to get a better air flow. In my plane I mounted 2 heatsinks where the bottom heatsink is sitcked on the VTX with the heat contuctive tape, that came with the heatsinks. The top heatsink is mounted with screws and thermal paste. You can mount the VTX with 4 M2.5x8 screws to the 3d printed mount. 4 M2x16 wood screws are required to mount it all to the T1 air frame.
You can mount the VTX also without heatsinks but I'm unsure about the required screw sizes.
The Fusion 360 source file is included to adjust/remix the design to your needs.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
3DiXY
