Logging Posts for Overmont Collapsing Wagon

When hauling camping gear in my Overmont wagon, I found some bulky items won't fit and want to roll out. The answer is to extend the corners of the wagon like a logging truck's fence spikes, or add tie-down points. The wagon's fabric skin is held in by flush plastic pegs, and if you replace those pegs with taller ones, you can safely haul longer or bulkier items above the rest of the wagon contents.

Nothing fancy about this print.  No supports required, there is a small bridge for the pegs to latch into their holes that most printers should find easy.  I used three perimeters and 15% infill which should be plenty of strength.

My wagon is the 200L compact variety but I think the Overmont design carries over to almost any other size they offer.  If not, these can serve as the basis for remixes for other wagon models.