Intel NUC Monitor back hanger for 27" LG monitor

After buying an Intel NUC 10 I found out that my LG 27" monitor doesn't have the vesa mount on the back. I found this neat idea posted by mojotang, but the top hanger was too narrow for my monitor, that is about 18 mm thick.

So I used Fusion 360 to create a new larger top hanger; the bottom part is the same from the original mojotang's thing.

You need to print 2 top and 2 bottom parts, and screw onto the original NUC mounting plate. I also used some 3M VHB double sided tape on the bottom part for imcreased safety.

How I Designed This

I'm a beginner with Fusion 360 but I managed it.

Support me

If you want, you can support my projects by buying me a coffee :)

https://www.buymeacoffee.com/papinist

Category: Computer