Ikea Brimnes Bed Spacers

These spacers are made to raise the bed off the floor by 25mm, enough so that the storage drawers can be easily used when you have carpets/rugs around the bed.

Additionally, they allow the underside of the bed to aerate/breathe, decreasing humidity and smells in the drawers.

I have been using them for more than a year and the difference in ease of use and reduction in smell in the drawers is dramatic.
No stability issues, they are rock solid.

You should print 1 x Center, 2 x Sides, 6 x Head/Feet.

Dimensions of the slots in the parts are: 
Center : 20mm/18.5mm
Side : 20mm
Head/Feet : 23mm

Enjoy, please leave feedback and contact me if you need a modification or something similar.

Print Settings:

Material: Any, PETG Preferable
Layer Thickness: Any
Perimeters: 5+ perimeters
Infill: 15%+ Gyroid infill
Supports: Not needed
5 top/bottom layers