January 12, 2026
Description
With this toothpaste squeezer it is possible to adjust the pressure on the toothpaste tube.
The with is 58mm, so it should fit for tubes with 55mm.
Since 3D printers have different tolerances, there are models with different gap widths.
For me, the version with a 0.6mm gap worked best.
If the thread of the nut is too tight or too loose, it can be scaled in the X and Y directions in the slicer.
The STL files always contain very thin frames in the model, which are no longer visible after slicing.
These frames are used for positioning, allowing the text to be moved to the same position as the model.
Opening STEP files as one model with multiple objects makes it easier to choose a different color for the Text.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MK_Design
