Wire safety end cap

This is wire end cap to safely terminate end of the wire. 

It utilizes 3x WAGO 221-2411 connectors which clamp on the wires and then put hide inside 3D printed housing to protect it from the environment. 

There are two types of water ingress protection. 

• IP68 gland which screw directly intro the housing
• 3D printed gland which is screw onto the corrugated tube and then into the housing

 On the side of the housing there is a dedicated slot for the label which slides and latch in place. Label can be used to mark the origins of the cable. 

Assembly