Reusable Sanding Sticks

Was looking up sanding sticks for miniature/gunpla sanding needs. Figured it's easier, faster and cheaper to just make my own.

Quick and easy prints, got labeled ones: 400, 800, 1500. Also got blanks. If more grit numbers are requested, I'll make em when get the time.

Dimension out of the box:

100mm x 20 mm x 4 mm
60mm handle and 40mm for sanding

The letters are 0.4mm deep so you can scale it by half and still get one layer for lettering, in case you need a 2mm thick sanding stick instead of 4mm

Tip: You can use the old carpenters trick to attach any sanding paper to these sticks. Slip of painters tape on the stick, a small dap of superglue on the tape, and press the sanding paper on top of the tape. This way you can replace the sanding paper easily.

Happy printing! 
- Muvoksi