October 8, 2023
Description
Metric hex key holder for sizes 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 mm.
Recommended material is TPU. Might work in PETG. Due to creeping, it will not work in PLA for more than a couple of days - after that, some keys will just slip out.
Depending on your step and flow calibration, you might need to scale this print up or down slightly for a perfect fit. As a point of reference: Scaling the part +-0.9% in the X & Y direction changes the biggest hole diameter by +-0.1 mm.
Approximate print time @ 60 mm/s: 0:50 h
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
jk_printer
