October 26, 2025
Description
Replacement wheels for a shop vacuum that was sold by several brands:
There is supposed to be a bushing too, mine was missing and too thin to be printed so i left it out. If you do still have the original ones please let me know if the wheels fit them, if you do want to leave them out and adapt the hole sizes to a tighter fit let me know and i'll upload the .step files.
I cut the spacer ring preventing the wheel from rubbing against the housing from the wheel so it would be easier to print, just align the pins with the holes and push into place. Put the wheels on, the centering ring with the flange pointing inside and then the locking clip inside the metal bar, once the pin is pushed in it should be clamped tight.
License:
Creative Commons — Attribution — Noncommercial
8
Ninefifty
