Spacers for SIMNET SP Pro Pedals

I bought a used set of SIMNET SP Pro loadcell pedals that had a few of the spacers missing. So I redesigned them and hope they are useful to anyone else as well.

Print settings:
I recommend printing them as solid as possible. I used PETG and printed at 0.2mm layer height. For solid layers, I just increased the following settings in Orca Slicer:

• wall loops: 6
• top shell layers: 10
• bottom shell layers: 10

Make sure the piston that goes through the inner hole can move freely and use some sanding paper if the tolerance is too little. If you want to adapt the models, you can copy the Onshape project and modify it there.

If you need the spacers for the clutch or throttle pedals as well, let me know in the comments and I'll add them.