October 26, 2025
Description
The Festool LR32 system is a good concept, but the adjustable rail spacers leave much to be desired. They are imprecise, slow, and annoying to use. So I created these spacers, you stick them on the rail and you're done. No adjusting, no screws.
The purpose of the 37mm spacer is obvious, 22.5mm is for drilling holes for hinges in doors.
Print on side. I use 3 wall loops, gyroid infill at 10% and I printed these in ABS and ASA. PLA should work just fine as well.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
jwr
