Show off your Pokémon fandom with these Pokéball-inspired coasters!
Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee table. No MMU required!
MMU version and Coaster Holder coming soon!
Features
Approximately ~100 mm (4") diameter.
Prints flat with standard PLA/PETG.
No MMU required.
Honeycomb pattern for a flexible, fabric-like texture.
Great for decorative or light-duty coaster use.
Clean, layered Pokéball design.
Recommended Settings
Material: PLA
Layer height: 0.2 mm
Infill: 15%
No supports required
Tester file available, if needed.
Printable Instructions
You'll need to apply your color changes when slicing the files. For all the files using a layer height of 0.2mm, the color changes are at Layers: 7.808.208.60
Colour Orders (Also in model file notes)
Pokeball: Red, White, Black
Great Ball: Blue, White, Black, Red
Ultra Ball: Black, White, Black, Yellow (2 different blacks or dark grey)
Master Ball: Purple, White, Black, Pink
Premier Ball (without Border): White, Red
Premier Ball (with Border): White, Red, Black
Avoid using translucent filament… especially when you transition between black and a different color ._.
Design your own pattern!
Blank Step file is available!
Design Notes:
I would limit to 4 colors if you are not using an AMS
Allow for 2 layers per color (i.e for 0.2mm Quality, Each layer should be at least at least 0.4mm in height)
Try to spread out the layers heights as much as possible, don't have all the colors on side
Nycat
