Phone Wall Mount / Macro Deck Case (Fusion 360 files included for customisation)
dasjulian3March 6, 2022
Description
IMPORTANT :
This model is specifically made to fit the Sony Xperia M4 Aqua. Fusion 360 - files and .step - files are included so you can use measurements of your own phone to make yourself a custom wall mount. I tried to make everything as intuitive as possible. If you still have questions regarding measurements,please don't hesitate messaging me. I'm available most of the time.
Now to the actual summary
This is a solid wall mount for the Sony Xperia M4 Aqua (customizable). I made it to use my old phone as a stream deck using this application: Macro Deck
I really recommend downloading Macrodeck first before hopping into Fusion 360 to see / measure the position of the actual used area on your screen which is probably a bit different for each phone.
Also dont forget the charging port.
Print Settings
Printer Brand:
Anet
Printer:
A6
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Tinmorry PLA black
Notes:
Can be printed without support:
* MDC - Case Part 1.stl * MDC - Case Part 2.stl * MDC - Wall Mount.stlCan pobably not be printed without support:
- MDC - Connector 1.stl
- MDC - Connector 2.stl
Post-Printing
For the assembly you will need:
- 4x M5*30mm screws
- 4x M5 nuts
- 1x Rod Ø10mm* 70mm
- All of the printed parts
Assembly:
Insert the 4 screws from the front through all parts of the case. The larger one of the two connectors needs to be at the bottom to properly angle the phone backwards. Lock the screws in place with the nuts. Dont use any glue. You will probably need to open it more than once in the future. Slide the connectors into the wall mount and fix them in place with the Ø10mm Rod.
