October 31, 2025
Description
I need feedback on this. The tolerances are tight (0.25), so a well tuned printer is mandatory. “RT” stands for Release Test in the naming. The RT3 or RT4 versions are the most relevant IMO, you tell me.
The available files will change regularly accross tests.
| Recommended settings | \_/ Ø 0.4 | \_/ Ø 0.5 | ||
| Layer height | 0.25 | 0.25 | ||
| Perimeters | 3 | 2 | ||
| Infill | 50% | 50% | ||
| Bottom & Top | 4 | 4 | 4 | 4 |
| Supports |
License:
Creative Commons — Attribution — Noncommercial
7
Zendama
